If you want to add more users and set passwords in EZCAD3, follow these steps: 1. Click “System Parameter” icon, and click “User manager”, tick “You must enter and password”. It is better to set one password for Administrator first, or everyone can log in by Administrator if there is no password. 2. Input password for… Continue reading How to add user and set password of EZCAD3?
Ezcad Manual
Ezcad Ezcad2 Ezcad3 laser marking software using manual, such as function introduction, parameter setting, etc..
We also provide Ezcad download here (software, manuals, drivers, etc.).
How to upgrade Ezcad3 software to new version?
If you want to upgrade the EZCAD3 software to a new version, here are the steps: Generally, you can begin to use the new version of EZCAD3 software. For safety, you can also check if the setting parameters in the new version software are all the same as the parameters in elder version. Click “Para[F3]”,… Continue reading How to upgrade Ezcad3 software to new version?
LC Communication Control Command V1.9 Instruction
Revision V1.1 Add serial number related commands (edit_snum, snum_index, edit_textdata);V1.2 Add acquisition times related commands (getcount, get_textdata)V1.3 Add command (get_currfile,get_filelist)V1.4 Add command (set_systime)V1.5 Add command (get_currtext)V1.6 Add command (changeobj_size,changeobj_power,changeobj_marknum)V1.7 Add command (reset_sernum)V1.8 Add command (setfixeddata)V1.9 Add command (setlimitcount) Communication support and parameter communication mode support serial communication and network communication to send data frames to… Continue reading LC Communication Control Command V1.9 Instruction
Hardware and System Requirements for EzCad2 Installation and Operation
The EzCad2 software runs on a PC with a 900 MHz CPU and 256 MB RAM at least. In general, we recommend the fastest PC available. EzCad2 was developed in Microsoft Windows XP and will run on Windows XP, WIN7, WIN8, and VISTA. Related: Hardware and System Requirements for EzCad3 The installation of EzCad2 is… Continue reading Hardware and System Requirements for EzCad2 Installation and Operation
How to convert handwriting into vector PLT format and mark it with ezcad?
1.After writing the text, use PS to remove the background, adjust the parameters, and save it in jpg format. 2.Import it into cdr, bitmap trace, save as PLT format. 3.Open the file in Ezcad, check the relevant settings, and click Apply.
How to make a pentagram in Ezcad2?
1. Select the “Polygon” in the Draw menu or click the polygon icon. 2. Hold down Ctrl + left mouse button and drag to draw an equilateral polygon. 3. Select the Edge Num as 5 in the left column and click Apply. 4. Click the polygon icon below to turn it into a pentagram, click Apply.
How does CDR save the file used in ezcad?
Just save the file in a format supported by ezcad. Such as plt, dxf, etc. What types of vector files can EZCAD software import?
How to generate and print QR code with Ezcad2?
Open ezcad2 software, click Draw Text. Click anywhere with the mouse in the blank area on the right and the default text will appear. Click the small triangle arrow in the Text column on the left to select “BarCode Font“, then find “QRCODE” in the drop-down box below, and click to select. Click Apply. After… Continue reading How to generate and print QR code with Ezcad2?
F3 Configuration Parameters: Laser Control
Laser type: Co2: It indicates that current laser size is Co2 laser. YAG: It indicates current laser size is YAG laser. Fiber: It indicates that current laser size is fiber laser. SPI_G3: It indicates that current laser size is SPI laser. Note: this function only supports USBLMC control card. Related: Error: current LMC board is… Continue reading F3 Configuration Parameters: Laser Control
