It is found that the two options of Save and Save As under the File menu are grayed out and cannot be clicked. The modified file cannot be saved. What’s the problem? There are two possible reasons. 1.The Ezcad2 software is a trial version. 2.This problem occurs when the laser marking machine is not turned on and connected… Continue reading Why can’t the modified file be saved in Ezcad2?
FAQs about Laser Marking
Why is the foot switch of the laser marking machine stuck and malfunctioning?
Stepping on the foot switch continuously, there will be a stuck phenomenon, and the marking will fail twice. The computer configuration is not low, what is the reason? If it is a 2nd generation laser mark control board, in Ezcad2, Param(F3) – Other, check the Enable marking start signal lock.
Is it normal that the indicator light of laser mark control board is not seen after powered on?
There will be a green light when the laser mark control board is powered on. If the indicator light does not light up, it may be that it is broken.
Why does the laser mark only one spot?
After selecting multiple objects in Ezcad, the laser will only mark one spot. What is the problem? It may be that the galvo is not working.
Why does adjusting the power of CO2 laser marker in Ezcad have no effect?
CO2 laser marking machine, adjusting the power in Ezcad seems to have no effect, is it because the laser mark control board is broken? First check whether the signal connected to the laser mark control board is correct. Whether the CO2 laser is using PWMTTL signal. Check if there is any problem with the signal line. Then… Continue reading Why does adjusting the power of CO2 laser marker in Ezcad have no effect?
How to set repeat laser marking times in Ezcad?
On the right of Ezcad interface, change the Mark Loop value.
Adjusting the speed parameter in Ezcad has no effect?
The marking speed is very slow. Adjusting the speed parameter in Ezcad has no effect? Try changing the Hatch Type and Line Distance.
How to adjust the box of ezcad workspace to the actual marking area size?
File – System parameter – WorkSpace, adjust the size value.
How to set the parameters of laser marking machine to mark black in ezcad?
Parameters for blackening on ABS engineering plastics?Parameters for marking black and marking blue on stainless steel or iron?Can you mark brown on aluminum or anodized aluminum (phone case)?Mine is a 20W ordinary fiber laser marking machine. Laser marking black on plastic, the speed is generally 1000, the power is about 30, the frequency is 20-30, and… Continue reading How to set the parameters of laser marking machine to mark black in ezcad?