This is related to the laser outlet. If it is a co2 laser, the line will be slightly thicker by increasing the power. The thickness of the lines marked by fiber laser is fixed. But there is a method that using the Hatch fuction to thicken the border line for some graphics.
FAQs about Laser Marking
QR code laser marking is not clear, how to adjust?
As shown in the picture, the laser marking QR code in the middle is not clear, and it feels like the QR code is obviously engraved into the product. How to adjust this? The picture shows that the QR code may be filled too densely or the power is too high. It is recommended to modify the… Continue reading QR code laser marking is not clear, how to adjust?
How does EzCad print out the effect of embossed text?
There are two options for zooming. One is to use a 2D galvo, add a motorized z-axis to achieve zoom, and use EZCAD3+DLC2-2D + to enable the 3d function. Another solution is to use a 3D galvo, with DLC2-3D board + EZCAD3.
EzCad laser marking keeps marking automatically, how to solve it?
Check F3 parameters – Port – Start Marking IO, see if it is low level, if it is, change it to high level.
What’s wrong with the prompt “Can not open correct file” after opening the software EzCad?
It is because there is no correction file and the “Use the correction file” in the F3 parameter is checked. If there is a correction file, please select the correct path; if there is no one, you can leave “Use the correction file” unchecked. Related: How to set Ezcad2 correction file?
What causes the laser to not emit light when it is connected to the board?
There are generally the following possibilities. A. Not on the focal plane. After marking a small circle continuously, manually adjust the distance between the galvanometer and the marking surface until the light is the strongest. B. Wrong choice of laser type. The correct laser type should be selected in the F3 parameter. C. Whether the… Continue reading What causes the laser to not emit light when it is connected to the board?
What is the problem when opening EzCad laser marking software with error – can’t find the dongle?
When opening EzCad2 laser marking software with error – “can not find dongle! Software will work at demo state.“, there may be some reasons, please check: A. Confirm whether the marking card needs an external dongle. At present, the mainstream marking cards are all integrated dongles and do not require an external USB dongle, but… Continue reading What is the problem when opening EzCad laser marking software with error – can’t find the dongle?
How to Install the Driver for Ezcad2?
For using laser marking machine with Ezcad2, install the driver for laser mark control board v2 step by step. Step 1 Turn on the machine power. Connect the laser machine and computer by data cable. Step 2 Copy marking software to computer. Check your computer’s operating system. Step 3 Open device manager and install driver.… Continue reading How to Install the Driver for Ezcad2?