The marking direction of the laser marking machine has changed from horizontal to vertical

in FAQs about Laser Marking, ,

Sometimes the marking direction of laser marking machine will change, such as horizontal to vertical.

How to solve the problem that horizontal marking becomes vertical marking?

The marking direction of the laser marking machine has changed from horizontal to vertical

1. Open the laser marking machine software Ezcad, and then enter the parameter setting interface(Param(F3) ), we can see that there are Galvo1 =X and Galvo2=X.

2. Choose according to the actual situation. If the marking direction is vertical with selecting Galvo1=X, change to select Galvo2=X, and click OK. At this time, the marking direction return to normal.

There is also a method, we can place the workpiece to be marked horizontally. This method is a physical change and is not convenient.

Laser marking machine is a relatively sophisticated equipment. In the process of using it, if you don’t know how to operate it, try not to change its parameters. The above problem is basically caused by reset or parameters modification. In this case, if you really don’t know how to operate, you can consult the laser marking machine manufacturer and then make changes.

Leave a comment

Your email address will not be published. Required fields are marked *