Adjust the Laser On TC, Laser Off TC, End TC and Polygon TC.
Delay Time
F3 Configuration Parameters: Other
Starting Mark Delay: The delay before marking. Finish Mark Delay: The delay after marking. Max Power Delay: The Max dealy when the laser power is changed from 0% to 100% during marking. When the power’s range is changed less then 100% during marking, the time is less proportional to the Max vaule. This function is… Continue reading F3 Configuration Parameters: Other
Four Delay Time: Laser On TC, Laser Off TC, End TC, Polygon TC
Laser On TC: When the scanhead has to execute a mark command, the scanner mirrors first have to be accelerated up to the defined marking speed. In the beginning of the movement, the laser focus moves very slowly which may result to burn-in effect at the start point. To avoid this, We insert a delay… Continue reading Four Delay Time: Laser On TC, Laser Off TC, End TC, Polygon TC
Horizontal or vertical lines will appear when the pattern is marked
Some parts of the printed pattern are missing – horizontal or vertical lines appear, just like broken lines, what’s the matter? For example, if I print a straight line, there will be a fixed breakpoint in the middle. Generally, these four TC need to be adjusted: