If marking is not done through the foot switch, will the foot pedal still output a high level signal after the marking is completed? After the marking end output port is successfully set, a signal will be output every time the marking is completed.
Ezcad2
EZCAD2 software keeps getting stuck
Every few minutes during marking, the EZCAD2 software gets stuck. What is the reason? Try to connect the earth wire.
Why are the image and text marked in different shades in one file?
A file in PLT format contains image and text. The image is marked very dark, and the words next to them are just right. what is the problem? Divide the image and text into two separate objects, and set different parameters for each Pen Number.
After turning on the red light continue mode, it cannot be turned off?
After turning on the red light continue mode, it cannot be turned off. It can only be closed by shutting down the machine. How to solve this problem? Press the first ESC exit key in the upper left corner of the keyboard.
Hardware and System Requirements for EzCad2 Installation and Operation
The EzCad2 software runs on a PC with a 900 MHz CPU and 256 MB RAM at least. In general, we recommend the fastest PC available. EzCad2 was developed in Microsoft Windows XP and will run on Windows XP, WIN7, WIN8, and VISTA. Related: Hardware and System Requirements for EzCad3 The installation of EzCad2 is… Continue reading Hardware and System Requirements for EzCad2 Installation and Operation