This is because the mark parameter has become default values. When the Ezcad2 software is installed, the YAG laser will be selected by default in Laser Control, with the default Current in Mark parameter. So if you want to change Current to Power, you need to select another type of laser in the settings. Click… Continue reading Power Mark parameter in Ezcad2 becomes Current, why? How to solve it?
F3 Configuration
F3 Configuration Parameters: Laser Control
Laser type: Co2: It indicates that current laser size is Co2 laser. YAG: It indicates current laser size is YAG laser. Fiber: It indicates that current laser size is fiber laser. SPI_G3: It indicates that current laser size is SPI laser. Note: this function only support USBLMC control card. PWM: Enable PWM signals: The PWM… Continue reading F3 Configuration Parameters: Laser Control
F3 Configuration Parameters: Field
Field: the widest range for marking. Gavlo 1=x: the track of gavlo 1 uesd as the X axis. Gavlo 2=x: the track of gavlo 2 uesd as the X axis. Offset X: The offset distance on X direction of scanhead. Offset Y: The offset distance on Y direction of scanhead. Use the corrected file: Use… Continue reading F3 Configuration Parameters: Field
F3 Configuration Parameters: Other – Fly Mark and Red light pointer
Fly Mark Mark on fly: choosing this item refers to enable “Fly mark” function. Fly from right to left: Choosing this item indicates that stream line direction is from right to left. Fly continue mode: Choosing it indicates mark object is continuous one, namely, we need to mark content on continuous object. (Such as: wire… Continue reading F3 Configuration Parameters: Other – Fly Mark and Red light pointer
F3 Configuration Parameters: Other
Starting Mark Delay: The delay before marking. Finish Mark Delay: The delay after marking. Max Power Delay: The Max dealy when the laser power is changed from 0% to 100% during marking. When the power’s range is changed less then 100% during marking, the time is less proportional to the Max vaule. This function is… Continue reading F3 Configuration Parameters: Other
F3 Configuration Parameters: Port
Stop mark input port: When in marking process, if the system detects there is a corresponding input signal, the current marking operation will be ended, and prompt the users with error information. Door IO: Check the port signal for opening and closing of the safety door. When the safety door is opened, processing will automatically… Continue reading F3 Configuration Parameters: Port