Without the “Mark On Fly” function, the marking result will be incorrect while the working pieces are moving. Enable this function the system will pursue the object’s position and revise it to make sure the marking result is correct. Enable Mark on Fly Users can enable “Mark on Fly” function from「File Menu」→「Option」→「System」→「Mark on Fly」, see… Continue reading How to Use the Function of Mark on Fly?
Fly Mark Mark on fly: choosing this item refers to enable the “Fly mark” function. Fly from right to left: Choosing this item indicates that stream line direction is from right to left. Fly continue mode: Choosing it indicates mark object is a continuous one, namely, we need to mark content on the continuous object.… Continue reading F3 Configuration Parameters: Other – Fly Mark and Red light pointer
Starting Mark Delay: The delay before marking. Finish Mark Delay: The delay after marking. Max Power Delay: The Max dealy when the laser power is changed from 0% to 100% during marking. When the power’s range is changed less then 100% during marking, the time is less proportional to the Max vaule. This function is… Continue reading F3 Configuration Parameters: Other
First determine whether the calibration of the galvo is accurate, and then accurately calculate the fly speed coefficient of the encoder. Check the Reverse Encoder Signals to make the software display speed positive, and statically adjust the Laser On TC to make the content marking complete.