Laser marking machine has a wide range of applications. Many words on various electronic components, building materials, etc. are marked by laser marking machines. However, there will be some glitches when using this device. For example, the marking text and patterns are different in depth. So how should this situation be handled? 1. The lens… Continue reading Solutions for different depths of graphics and texts marked by laser marking machines
Graphic Filling
Blanks occasionally appear in laser coding
Try to change the filling method, or check if the focal length is correct.
Red vertical lines appear in the fill, is there a problem with the setting?
It is possible that two fills are enabled, or cross fill is checked.
How to mark hollow characters in the marking software?
Add a box to the text, select the Group at the same time, and check the All calc when filling.
Edit Menu: Hatch
“Hatch” is used to force EzCad to calculate the hatch fills for the current objects. The object to be filled must be closed curve, and if you choose many objects to fill, these figures can be objects nested mutually. Any two objects may not have intersectant parts. Related faqs: The Hatch is not complete?The dxf… Continue reading Edit Menu: Hatch
Some fancy character are incompletely filled?
For example, some continuous-stroke English fonts. It is possible that the nine-point correction has not been adjusted properly and needs to be measured again. How to operate the Ezcad2 software? In the Hatch option, select the Mark Contour, reduce the Line Distance, and select the one-way filling method. If the problem cannot be solved, the coordinate values… Continue reading Some fancy character are incompletely filled?
Graphics cannot be found on the interface after opening the vector file in Ezcad, or the filling is incomplete?
When opening the vector drawing, select “Show preview” and check “Put to center“. If you find that the filling is not complete, you can select “Auto connect curve“, click Apply to center.
The graphic is not filled completely in EzCad
The drawing in CAD is correct, and the full filling is ok. I thought it was because the lines overlapped and didn’t connect. However, after the change, the filling on EzCad was still incomplete, and only the inverted rounded corners were filled. . . . . . Check the All calc, if it still doesn’t… Continue reading The graphic is not filled completely in EzCad
Questions about filling(hatch) of vector graphic
After the bitmap was converted to a vector graphic, I filled it directly, and the graphic disappeared. After ungrouping, it became dense dots, and there was no way to fill it. Check Optimize curve and Auto connect curve.