The image hatch in Ezcad2 is incomplete, there are white lines. The Line Distance is too large, try making it smaller.
The marking speed is very slow. Adjusting the speed parameter in Ezcad has no effect? Try changing the Hatch Type and Line Distance.
Laser marking machine is an industrial laser equipment, and many users have different requirements during use. If you need to mark arrows, how to draw them in the marking software ezcad? 1. Click the Draw Text Tool to add text. 2. In the text box, use the input method to enter the corresponding arrow symbol,… Continue reading How to draw arrows in the marking software Ezcad?
When using the laser marking machine, the marked fonts are not clear enough, how to adjust it? What’s causing it? 1. Insufficient power During the use of the laser marking machine, if the power does not meet the pre-set standard, the marked font may not be clear enough. The power setting of the marking machine… Continue reading How to adjust the fonts not clear printed by the laser marking machine?
The thickness of the frame marked by laser marking machine is fixed, so when making a product nameplate, there will be a problem that the frame line is not thick enough. How should it be solved? The following is a tutorial on thickening the border lines in the laser marking software EzCad2. 1. Draw two rectangles in… Continue reading How to thicken the marking border line in EzCad?
Sometimes, when the generated plt/ai/dxf format vector file is imported into EZCAD software, the incomplete Hatch will appear. This is because there is no closure during the drawing process. The solution is as follows: 1. Convert the PLT vector file successfully imported into the Ezcad into curves, and ungroup it. 2. Automatically connect the curves with the phenomenon of “missing… Continue reading The Hatch of plt/ai/dxf graphics imported into EzCad is not complete
When marking stainless steel products with a laser marking machine, sometimes there is a problem that the marking letters are yellow. Why is the word printed by laser marking machine yellow? The power is too large. How to adjust? We can slightly adjust the marking parameters of the laser marking machine in the software Ezcad. For… Continue reading Why are the letters printed by laser marking machine yellowish?
Some people make mistakes when using the laser marking machine. At this time, it is very difficult to change the wrong font or pattern. So is there a way? In fact, there is a way to change it, but the effect is not so ideal. For example, if the marking text is wrong, you can… Continue reading How to Correct the Wrong Mark of Laser Marking Machine?
Open ezcad2 software, click Draw Text. Click anywhere with the mouse in the blank area on the right and the default text will appear. Click the small triangle arrow in the Text column on the left to select “BarCode Font“, then find “QRCODE” in the drop-down box below, and click to select. Click Apply. After… Continue reading How to generate and print QR code with Ezcad2?