1.Wash your hands first, then blow dry or leave to dry. 2. Put on finger cots. 3. Gently remove the lens to check. 4. Blow off the dust on the surface of the lens with an air ball or nitrogen. 5. Use a cotton ball dipped in lens swabbing solution to stick the residue on it. 6. Drop an appropriate… Continue reading How to wipe the laser lens of laser marking machine?
Laser
Why is laser marking machine especially suitable for the automated processing industry?
Laser marking is a marking method that uses a high-energy-density laser to locally irradiate the workpiece to vaporize or change the color of the surface material, thereby leaving a permanent mark. More importantly, because of the good spatial controllability and time controllability of the laser, the degree of freedom of the material, shape, size and… Continue reading Why is laser marking machine especially suitable for the automated processing industry?
Does the fiber laser marking machine have a long service life?
Fiber laser marking machine has the advantages of fast marking speed, long service life and low equipment failure rate. For example, the service life of the semiconductor laser marking machine is about 20,000 hours, while the service life of the fiber laser marking machine is about 100,000 hours. Overall, as long as you pay attention… Continue reading Does the fiber laser marking machine have a long service life?
What causes the laser to not emit light when it is connected to the board?
There are generally the following possibilities. A. Not on the focal plane. After marking a small circle continuously, manually adjust the distance between the galvanometer and the marking surface until the light is the strongest. B. Wrong choice of laser type. The correct laser type should be selected in the F3 parameter. C. Whether the… Continue reading What causes the laser to not emit light when it is connected to the board?