The image hatch in Ezcad2 is incomplete, there are white lines. The Line Distance is too large, try making it smaller.
Line Distance
Adjusting the speed parameter in Ezcad has no effect?
The marking speed is very slow. Adjusting the speed parameter in Ezcad has no effect? Try changing the Hatch Type and Line Distance.
How to set the parameters of laser marking machine to mark black in ezcad?
Parameters for blackening on ABS engineering plastics?Parameters for marking black and marking blue on stainless steel or iron?Can you mark brown on aluminum or anodized aluminum (phone case)?Mine is a 20W ordinary fiber laser marking machine. Fiber Laser marking black on plastic, the speed is generally 1000, the power is about 30, the frequency is 20-30,… Continue reading How to set the parameters of laser marking machine to mark black in ezcad?
How to adjust the marking speed of laser marking machine?
In the process of using laser marking machine, if you feel that the marking speed is too slow, how should you set it? Marking software parameter setting 1. Open the laser marking machine software Ezcad2, we find the default parameter settings on the right side of the software interface and uncheck the Use default param. 2. Change… Continue reading How to adjust the marking speed of laser marking machine?
Why are the letters printed by laser marking machine yellowish?
When marking stainless steel products with a laser marking machine, sometimes there is a problem that the marking letters are yellow. Why is the word printed by laser marking machine yellow? The power is too large. How to adjust? We can slightly adjust the marking parameters of the laser marking machine in the software Ezcad. For… Continue reading Why are the letters printed by laser marking machine yellowish?
Edit Menu: Hatch
“Hatch” is used to force EzCad to calculate the hatch fills for the current objects. The object to be filled must be closed curve, and if you choose many objects to fill, these figures can be objects nested mutually. Any two objects may not have intersectant parts. Related faqs: The Hatch is not complete?The dxf… Continue reading Edit Menu: Hatch