Laser marking machine is a kind of professional engraving equipment integrating light, machine and electricity. Whether it is used for manufacturing or for DIY personalization, it is popular in all walks of life. Because of the relatively expensive price, laser marker maintenance has also been paid attention to. After the laser marking machine is used for a… Continue reading How to Maintain the Laser Marking Machine?
Maintenance
How to deal with the contamination of the focusing lens surface of laser marking machine?
When the marking effect of the laser marking machine is not good, you should carefully check whether the surface of the focusing lens is contaminated. If the equipment is used for a long time, the dust in the air will be adsorbed on the surface of the lower end of the focusing lens, which will… Continue reading How to deal with the contamination of the focusing lens surface of laser marking machine?
What Should Be Paid Attention to in the Operation of Laser Marking Machine?
1. Comply with the safety operation rules of the laser marking machine. Start the laser marking equipment in strict accordance with the startup procedure. 2. The operator should be trained, familiar with the structure and performance of the laser marking machine, and master the relevant knowledge of the operating system. 3. Wear labor protection equipment… Continue reading What Should Be Paid Attention to in the Operation of Laser Marking Machine?
How to Maintain the Lens of Fiber Laser Marking Machine?
Due to the working environment, the optical lens of the fiber laser marking machine may be contaminated. Therefore, after a period of use, if not maintained in time, dust will corrode the lens coating. The lens with damaged coating cannot reflect light and cannot pass through the laser. On the contrary, it will absorb the… Continue reading How to Maintain the Lens of Fiber Laser Marking Machine?
How Should the Laser Marking Machine Be Maintained?
The component hardware of the laser marking machine will wear out over time. So how to maintain the laser marking machine? 1. When the laser beam is working, don’t contact or collide with the beam of the workbench. 2. Pay attention to the environment of the processing place. The temperature and humidity must meet the standards, ensure… Continue reading How Should the Laser Marking Machine Be Maintained?
Daily Operation and Maintenance of Laser Marking Machine
1. Marking parameters of the marking machine, the electric current should not exceed 20A, so as to avoid laser burns to each lens. 2. Before the laser marking machine works, the chiller must be turned on and wait for the real-time temperature to be consistent with the set temperature, and the difference should not exceed 0.5°C.… Continue reading Daily Operation and Maintenance of Laser Marking Machine
Why does the laser output power drop?
After the laser marking machine has been used for a period of time, the reasons for the decrease of the laser output power: ①Whether the laser resonant cavity has changed: fine-tune the front and rear resonator lenses to make the best output spot. ②Whether the all-trans and output diaphragm are defaced. ③Condensation is formed on the… Continue reading Why does the laser output power drop?