Fault reasons and solutions: ①The laser output power does not meet the requirements, and the high-power laser needs to be replaced. ②The turn-off power of the acousto-optic switch cannot meet the requirements, and the acousto-optic switch needs to be replaced. ③ The optical path adjustment is not accurate, re-adjust the optical path. ④ The surface… Continue reading Laser marker cannot achieve the desired marking depth
Optical Path
Why cannot the laser marking reach the expected marking depth?
Reasons: ① Whether the laser output power meets the requirements. ②Whether the turn-off power of the acousto-optic switch meets the requirements. ③ Whether the optical path adjustment is accurate. ④Whether the workpiece surface is on the focal plane.
The laser output power of the laser marker is normal, but the laser beam cannot mark?
Reasons: ① Whether the adjustment of the optical path system is accurate. ②Whether the acousto-optic switch can function as a switch.
Solutions for different depths of graphics and texts marked by laser marking machines
Laser marking machine has a wide range of applications. Many words on various electronic components, building materials, etc. are marked by laser marking machines. However, there will be some glitches when using this device. For example, the marking text and patterns are different in depth. So how should this situation be handled? 1. The lens… Continue reading Solutions for different depths of graphics and texts marked by laser marking machines
Optical Path Adjustment Method of Laser Marking Machine
1. Turn on the laser marking machine according to the normal startup sequence. Note that the chiller must be turned on and wait for the real-time temperature to be consistent with the set temperature before proceeding to the next step. 2. Remove the protective cover of the laser marker, and be careful not to rub… Continue reading Optical Path Adjustment Method of Laser Marking Machine
Laser beam of the laser marking machine can not mark
The laser output power of the laser marking machine is normal, but the laser beam cannot play a marking role: ①Whether the adjustment of the optical path system is accurate. ②Whether the acousto-optic switch can function as a switch.