Follow the steps to set 3D Emboss Engraving of EZCAD3: 1. Enter 3D view, click “STL” to import a 3D file, or we can click “Creating a basic 3D surface” to create a basic 3D file. 2. We can view it from different directions. 3. Slice the 3D file. 4. Click “Add contour”, then click… Okumaya devam et How to set 3D Emboss Engraving of EZCAD3?
Ezcad Kılavuzu
Ezcad Ezcad2 Ezcad3 lazer markalama yazılımı manuel olarak kullanılarak fonksiyon tanıtımı, parametre ayarı vb. gibi işlemleri yapmaktadır.
Ayrıca biz de sağlıyoruz Ezcad'ı buradan indirin (yazılım, kılavuz, sürücü vb.)
How to set 2D Emboss Engraving of EZCAD3?
Follow the steps to set 2D Emboss Engraving of EZCAD3: 1. Create a new TEXT 2D file or import a vector file to Ezcad3, set its size and put it to center. 2. Click “3D” to enter 3D view, click “Slice” to slice the file, remember to tick “Using selected two-dimension object hierarchy”, set the… Okumaya devam et How to set 2D Emboss Engraving of EZCAD3?
EZCAD2: Emission Delay Setting
Step 1: Click “Draw Time” icon, to build a timer. Step 2: Setting the time for delay. If want to delay 3 seconds, then input 3000ns here, and then click “Apply”. Step 3: Then click “Draw Text” or “Import Vector File” or “Open” the saved file. Remark: If click “Mark” to begin to work, it will delay for 3 seconds… Okumaya devam et EZCAD2: Emission Delay Setting
Instruction for Delay Parameters in Ezcad Ezcad3
1. The control of the scanner head is mainly reflected in the following parameters: Marking speed: The movement speed of the scanner head when the laser is actually marking on the objects. Jump speed: Refers to the speed when transferring (positioning) between each stroke or figure during the marking process. If the skip speed is… Okumaya devam et Instruction for Delay Parameters in Ezcad Ezcad3
What is wobble function in EZCAD3?
Wobble: it will make bold when you mark a single line and need it to be bold. It will save time. Related: How to thicken the marking border line in EzCad2?
EzCad2 Düzeltme Dosyası: 9 Noktalı Kalibrasyon Kılavuzu
1. Kalibrasyon yazılımını bulun EzCad2 dosya dizinini açın ve 9 noktalı kalibrasyon yazılımına girmek için “Corfile2”ye çift tıklayın. 2. Kalibrasyon parametrelerini ayarlayın Lazer türünü ve işaretleme parametrelerini ayarlamak için “F1 设置激光器参数”e tıklayın (normalde işaretleme parametreleri varsayılandır). Genellikle, fiber lazer türü IPG, SPI'dir ve ayrı olarak kontrol edilir. Tıklayın… Okumaya devam et EzCad2 Correction File: 9-Point Calibration Manual
What is “Auto rotate hatch angle” in Ezcad3?
Checking this function means that each time the laser completes one marking pass, the fill lines will automatically rotate by the set angle and then perform the next marking. For example, if we set the angle to 0 degrees and the automatic rotation angle to 30 degrees, the first marking will be at 0°, the… Okumaya devam et What is “Auto rotate hatch angle” in Ezcad3?
How to set 3D Deep Engraving of EZCAD3?
Follow the steps to set 3D Deep Engraving of EZCAD3: 1. Enter 3D view, click “STL” to import a 3D file, or we can click “Creating a basic 3D surface” to create a basic 3D file. 2. We can view it from different directions. 3. Aim to deeply engraving this file, we need to rotate… Okumaya devam et How to set 3D Deep Engraving of EZCAD3?
How to set 2D Deep Engraving of EZCAD3?
Follow the steps to set 2D Deep Engraving of EZCAD3: 1. Create a new TEXT 2D file or import a vector file to Ezcad3, set its size and put it to the center. 2. Hatch the file. 3. Click “3D” to enter 3D view, click “Slice” to slice the file, remember to tick “Using selected… Okumaya devam et How to set 2D Deep Engraving of EZCAD3?
