Due to the uniqueness of the UV laser marking machine, it is perfect for marking on plastic materials. Ultraviolet lasers have short wavelengths. At the same time, the UV laser marking machine avoids material damage caused by excessive heat input. The characteristics of UV laser marking machine are: fast marking speed, no pollution and easy… Continue reading What Are the Advantages of UV Laser Marking Machine?
1. Remove the focus lens from the holder by gently rotating it. 2. Bend the lens wipe paper into a few folds, and then wet it with cleaning fluid. 3. Gently wipe the surface of the lens with the wet lens paper. It needs to repeatedly wipe several times until the lens is clean that… Continue reading How to Clean the Focus Lens of Laser Marking Machine?
Hand-held laser cleaning machine, also known as hand-held laser rust remover, is a device that can be used to remove stains and rust on the surface of metal materials. It is a very popular metal cleaning process in recent years. Traditional metal cleaning methods include: mechanical friction cleaning, chemical corrosion cleaning, liquid solid strong impact… Continue reading Hand-held Metal Stain and Rust Removal Equipment – Portable Laser Cleaning Machine
Laser marking machine has good beam quality, small size, high marking accuracy, and the speed is 3 times that of the traditional machine. Usually, it does not need to replace the water, change the light, and adjust the optical path. The life span is up to 100,000 hours. There is no depletion of materials. But… Continue reading What Checks Are Required for Laser Marking Machines Before Operation?
MOPA laser marking machine is a marking equipment using MOPA (adjustable pulse width) fiber laser. It has good pulse shape control capability. Compared with Q-switched fiber lasers, the pulse frequency and pulse width of MOPA fiber lasers are independently controllable. Through the adjustment and matching of the two laser parameters, a constant high peak power… Continue reading What Are the Advantages of Mopa Laser Marking Machine Compared With Others?
Now fiber laser marking machines are all modular. A machine is made up of several modules combined together. The most basic laser marking machine consists of: laser, fiber galvanometer, marking card, galvanometer, red light, beam expander, laser power supply, It is composed of several accessory modules such as marking card power supply and optical fiber marking… Continue reading What Are the Components of the Fiber Laser Marking Machine?
1. The focusing performance of the laser beam. It is because the focal point of the laser beam is very small, so the energy is concentrated. Without good focusing performance, the ideal laser spot cannot be obtained, the laser with high energy density cannot be used, and laser marking cannot be achieved. 2. The focal… Continue reading What Affects the Marking Quality of a Laser Marking Machine?
1. Check the power cord of laser marking machine to make it connected correctly and reliably. 2. Insert the key switch, turn it 90°clockwise to the “on” position, turn on the main power. 3. Confirm that the mushroom button (emergency stop switch) is in the pressed state. 4. Turn on the power switch of the… Continue reading Laser Marking Machine Opening Steps
PVC material is a non-crystalline vinyl polymer material, which has good resistance to oxidizing agents, reducing agents and strong acids. PVC materials are divided into two types: soft and hard, and are widely used. Hard applications include pipes and plates, and soft applications include containers such as mineral water and beverage bottles. For a variety… Continue reading Which Laser Marking Machine Can Mark on PVC Material?