How is the speed of fiber laser marking machine affected?

in FAQs about Laser Marking, ,

There are two main factors affecting the speed of fiber laser marking machine:

1. Internal factors

The internal factors are mainly laser frequency, laser spot mode and beam divergence angle, laser power, processing auxiliary gas, material, etc. The internal factor is mainly noticed when selecting the model in the early stage, and the choice should be made in accordance with the opinions of the laser engineer.

2. Processing workpiece

Another factor that customers need to pay attention to when processing, mainly marking density, marking format, marking depth and laser spot size.

Marking density

In the case of the same width, the same spot, and the same depth, the higher the marking density, the slower the corresponding marking speed. The reason is that the density directly increases the marking area.

Marking Format

Because the deflection area of the large-format marking galvanometer increases, the marking speed of large-format is slower than that of small-format.

Marking depth

According to the demand, if the marking depth needs to be deepened, the parameters of the fiber laser marking machine need to be adjusted. The power, current and other factors of the fiber laser marking machine need to be increased, so the marking speed will be affected during these processes.

Laser spot size

The smaller the spot is, the smaller the marking volume is. Therefore, the larger the spot, the faster the marking speed.

The above are the skills to improve the marking speed of fiber laser marking machine. I believe that if you follow these methods, you can improve the marking speed and create higher benefits.

Leave a comment

Your email address will not be published. Required fields are marked *